SD BIOSENSOR - STANDARD Q "COVID 19" Antigents (Nasal) Test Kit

In stock
MMK 13,800
Estimated Delivery Date : 28/11/2021
SKU:18000018
Brand:SD BIOSENSOR
Product Name:SD BIOSENSOR - STANDARD Q "COVID 19" Antigents (Nasal) Test Kit
Specimen :Nasal & Nasopharyngeal
Time to result:15-30 minutes
Weight:N/A
Description:

STANDARD Q COVID-19 Ag Test is a rapid chromatographic immunoassay for the qualitative detection of nucleocapsid antigens to SARS-CoV-2 present in human nasal or nasopharyngeal specimens. This test is for administration by healthcare workers and labs only, as an aid to early diagnosis of SARS-CoV-2 infection in patient with clinical symptoms with SARS-CoV-2 infection. It provides only an initial screening test result. This product is strictly for medical professional use only and not intended for personal use. The administration of the test and the interpretation of the results should be done by a trained health professional. The result of this test should not be the sole basis for the diagnosis; confirmatory testing is required.

STANDARD Q COVID-19 Ag Test has two pre-coated lines, “C” Control line, “T” Test line on the surface of the nitrocellulose membrane. Both the control line and test line in the result window are not visible before applying any specimens. Mouse monoclonal anti-SARS-CoV-2 antibody is coated on the test line region and mouse monoclonal anti-Chicken IgY antibody is coated on the control line region. Mouse monoclonal anti-SARS-CoV-2 antibody conjugated with color particles are used as detectors for SARS-CoV-2 antigen device. During the test, SARS-CoV-2 antigen in the specimen interact with monoclonal anti-SARS-CoV-2 antibody conjugated with color particles making antigen-antibody color particle complex. This complex migrates on the membrane via capillary action until the test line, where it will be captured by the mouse monoclonal anti-SARS-CoV-2 antibody. A colored test line would be visible in the result window if SARS-CoV-2 antigens are present in the specimen. The intensity of colored test line will vary depending upon the amount of SARS-CoV-2 antigen present in the specimen. If SARS-CoV-2 antigens are not present in the specimen, then no color appears in the test line. The control line is used for procedural control, and should always appear if the test procedure is performed properly and the test reagents of the control line are working.

How to use:

SPECIMEN COLLECTION AND PREPARATION :

1. To collect a nasopharyngeal swab specimen, insert a sterile swab into the nostril of the patient, reaching the surface of the posterior nasopharynx

1. To collect a nasopharyngeal swab specimen, insert a sterile swab into the nostril of the patient, reaching the surface of the posterior nasopharynx

2. Using gentle rotation, push the swab until resistance is met at the level of the turbinate.

3. Rotate the swab a few times against the nasopharyngeal wall.

4. Remove the swab from the nostril carefully.

5. Specimen should be tested as soon as possible after collection

6. Specimens may be stored at room temperature for up to 1 hours or at 2-8°C/ 36-46°F for up to 4 hours prior to testing.

Warnings and precautions:
  • Do not re-use the test kit.
  • Do not use the test kit if the pouch is damaged or the seal is broken.
  • Do not use the extraction buffer tube of another lot.
  • Do not smoke, drink or eat while handling specimen
  • Wear personal protective equipment, such as gloves and lab coats when handling kit reagents. Wash hands thoroughly after the tests are done.
  • Clean up spills thoroughly using an appropriate disinfectant.
  • Observe established precautions against microbiological hazards throughout testing procedures.
  • Dispose of all specimens and materials used to perform the test as bio-hazard waste. Laboratory chemical and biohazard wastes must be handled and discarded in accordance with all local, state, and national regulations.
  • Desiccant in foil pouch is to absorb moisture and keep humidity from affecting products. If the moisture indicating desiccant beads change from yellow to green, the test device in the pouch should be discarded.
Storage and stability:Store the kit at 2-30°C / 36-86°F out of direct sunlight. Kit materials are stable until the expiration date printed on the outer box. Do not freeze the kit.
More Information
Bar Code 2000710180007
Write Your Own Review
You're reviewing:SD BIOSENSOR - STANDARD Q "COVID 19" Antigents (Nasal) Test Kit
Close
We can't find products matching the selection.